Photos
Prices
To order
Contacts
Custom-built kitchens
Painted
Painted facades will surprise you with the diversity of a color range and a perfect coating in a matte and glossy implementation.
Specific features of painted facades
- Do not absorb smells and moisture;
- Resistant to higher temperatures, withstands easily the proximity to the cookstove;
- Resistant to the direct sunlight, what makes it possible to keep the furniture color intense and deep for many years;
- Resistant to chemical agents: surfaces lacquered with acrylic varnish is unaffected by water, tea, fat and long-term contact with a solvent.
Wooden
A wooden kitchen creates the atmosphere of home warmth and comfort.
Specific features of wooden facades
- Aestetic qualities. A solid wood is a main dressing for a modern kitchen;
- Longevity. If ypu need a prestigious heirloom kitchen, a solid wood as the main material is the right decision;
- Environmental compatibility. Not a single material can be compared to the natural wood in this factor.
Laminated with a pellicle
We laminate facades with a complicated relief design.
Facades are manufactured from a pollution-free MDF.
Specific features of pellicle facades
- Low cost;
- The diversity of a color range;
- The possibility of manufacturing volume and curved facades;
- Spotting resistance;
- Fading resistance.
Veneer
Specific features of veneer facades
- They are not worse in appearance, reliability and longevity than facades of solid wood, they are strongly resistant to alligatoring and casting;
- Less “capricious” in service than facades of solid wood;
- Veneered furniture is not as heavy and massive as wooden furniture.
We use hinges, manufactured by a German company Hettich. Hinges have a built-in mechanism of smooth shutting (damping), and the function of self-closing actuates even with a wide angle.
In drawers with dish racks we use hinges with opening degrees 105 and 120 for convenience of stacking dishes.
Drawer guides are manufactured by the Italian enterprise FGV and tested by applying 100 000 openings. We use guides of champagne color with silver interspersing.
-
Smooth opening -
100% drawer opening -
Carry a load of 45kg -
Double synchronizedsliding
An ornamental grating performs a function of decoration and drawer ventilation. Can be of direct or half-rounded version, veneered or painted.
Dish rack is fabricated of premium class stainless steel, it preserves it’s structure at the stationary or buffing load. A drip tray is included into the set.
Cornices are manufactured on the Italian factory; they are covered with the natural veneer, hot stamping ornament and painted with paintwork materials.
Lift mechanisms with smooth, soft opening and closing. Even if you close the cupboard hardly, lifts will soften the closing.
We use moisture-proof Italian-made worktops in our kitchens. Worktop thickness – 39mm. Moisture-proof PB is being manufactured in France. Silicone-treated laminate joint under the worktop protects the worktop well from moisture ingress .
The molding is made of the same laminate as the worktop. A sealant between the worktop and the wall won’t let the moisture leak behind cupboards. Base moldings are being manufactured in Italy.
The collection includes some series, differing in design and color. There are silvery, bronze, golden brassy tone colors.
Ordinary shock absorbers are not able to keep the façade in the intermediate position. We use shock absorbers with a Free-stop function. They open and close the facade in a smooth manner and fix it in any position in spite of the size and weight.
We use Franke kitchen sinks and mixers. You can choose a kitchen sink made of metal, fragranite or techtonite to match the worktop. We can help you to choose in-sink-erators, trash cans, cutting boards by sink size, knives, soap dishes, mounted into the worktop.
We produce decorative glass by using sand-blowing matting, filigreed engraving of glass, decorative paints and heat-treated color plates.
Our professionals create unique stained glasses. A delicate engraving of silver and golden implementation will daintify the glass. With the help of it a complex design looks delicate and tender. Colorful interspersing adds the depth of color.
There is no difference between the color plate and the glass surface after the heat treatment, which adds naturalness and completeness to the stained glass.
A pull-out dish rack on smooth-closing guides is made of stainless steel.
Drawers are illuminated by LED bulbs. Switching on and off, brightness level are regulated with the help of the remote control.
Upper cupboards are fastened by adjustable bracket hinges which are able to carry the load of 120kg. Bracket hinges can be up/down, left/ right adjusted and also they can be adjusted for height.
Cupboards and visible cuts are glued over with 0,55-0,6mm ABC salvage.
Kitchen hoods are being manufactured based on our technical wishes, a centrifugal turbine and an engine with a capacity of 760 m3 are used in them. Ordinary kitchen hoods use abutment engines with a capacity of 400–460 m3.
Cooktops are being fabricated based on our requirements:
- The appearance of a massive cast-iron grating doesn’t get worse under the action of temperatures and detergents;
- Electrical ignition and gas supply control will switch it off in case if the fire of the burner is out;
- A turbo-burner and 3 fire rings make it possible to boil the water very fast.
- Volume — 73 liters;
- Consumption — 0,77 kW;
- The number of lines of the heating element — 8 pcs.
Use it on the kitchen sink for water runoff from vegetables and fruits, use it also as a trivet for hot dishes to protect the worktop from damage. The trivet is made of stainless steel.
Choose the kitchen to get to know what forms the set
-
-
-
-
How to order a kitchen
Before the order
Visit our salons, observe kitchen sets, different in style and materials. Look into the color range and fittings. Take an expert opinion.
- You send us a drawing, a plan, a scheme or a photo with dimensions and the model of furniture you wish.
- Managers will calculate an approximate cost of the kitchen.
- You call a measurer, who makes measurements, hears your wishes, gives advice and proposes his variants.
- A 3D model is created after that. You will get an image on your e-mail. It is possible to change the color of facades, worktops, etc. in the 3D model according to your wishes.
- You come to our shop to choose handles, stained glasses, worktop and other elements, and choose the color of facades once again.
- A manager will write up a manufacturing order. Before the beginning of the work, you pay out an advance paying equal to 30% of the cost, the rest 70% is to be paid out before getting the kitchen.
To order the kitchen in Chisinau
MD 2002, Chisinau City,
Botanica District, 54 Pandurilor Street.
Show on the mapHide the map
N 46 59.832
E 28 52.010
Tuesday—Friday: 9:00—18:00
Saturday: 10.00—16.00
Sunday-Monday: non-working day
Republic of Moldova,
MD 2060, Chisinau City,
Botanica District, 110 Brancusi Street.
Show on the mapHide the map
N 46 59.345
E 28 51.542
Monday—Friday: 10:00—19:00
Saturday: 10:00—15:00
Sunday: non-working day
MD 2024, Chisinau City,
7 Calea Basarabiei Street (Calea Mosilor). Shops № 8, 9
Show on the mapHide the map
N 47 01.881
E 28 51.362
Tuesday—Sunday: 9:00—16.00
Monday: non-working day
